Custom Bagger Products

Click Photos to Enlarge

These Great Looking hand controls are CNC machined with a manufacturing process which allows to cut billet aluminum with variable curving radiuses (3D machining): the result is a unique product with stunning design.

Brake master cylinder comes with a 2-buttons switch clamp.

5/8" bore brake master cylinder for single disc and dual disc applications.

NOTE: we suggest to use DOT 4 brake fluid. in any case do not use silicon based oils.





NOTE: Our 3D hand controls are like most aftermarket hand controls, there is really nothing different to them as far as wiring goes. You absolutely do not have to re-wire the bike, you just use the stock wires and solder them to the wires that come out from the controls' switch housings.
All buttons have momentary switches, which work no problem with start, horn and turn signals.
Only the high/low beam button needs an on/off function: to achieve this you need to mount a relay (you can buy ours or get one at Radio Shack or any other place that sells electric supplies).
As for the kill switch, you really do not need it: you just kill the bike turning the key to the off position (like you do on cars). All aftermarket hand controls are like this, nobody wants or needs the ugly HD toggle switch.


These Great Looking hand controls are CNC machined with a manufacturing process which allows to cut billet aluminum with variable curving radiuses (3D machining): the result is a unique product with stunning design.

Hydraulic Clutch master cylinder comes with a 3-buttons switch clamp.

NOTE: we suggest to use DOT 4 brake fluid. in any case do not use silicon based oils.

Click Photos to Enlarge

These Great Looking hand controls are CNC machined with a manufacturing process which allows to cut billet aluminum with variable curving radiuses (3D machining): the result is a unique product with stunning design.

This Clutch Master Cylinder comes with a 3-buttons switch clamp.