All these Sidemounts fit ALL Years and Model V-Rods Mounting to the Lower or Upper Shock Bolts.
But... For Installing, YOU have to Drill the Holes for mounting as we can't do it, you decide where you want your plate to be mounted high, low out, in, it's a personal thing, and 95% of the customers that try to install this FAIL!
Because most people don't know how to install electrical items, as well as solder the wires, and "heat shrink tube" the wires so they don't get wet and feed through the swingarm better! Not counting the actual install to the wiring harness.
If your not electrically trained or have experience in wiring please don't attempt this install!
As you will run the wires into the swingarm up and out of the swingarm to the wire harness under your fender!
We Provide the Instructions but you will NEED Xtra Wire, Heat Shrink Tubing and a Soldering Gun to Install these systems with LEDS!
Even the "GR Rear License Plate Kit" has to be Wired but is an Easier Install bolts to your existing threaded holes with your Stock hardware.