• 50/50 Led Brake/Turn Strips
50/50 DUAL COLOR "TRU-FLEX"
 
Combines your Brake & Turns in One Led Strip

What a great idea!

This 50/50 Led Strip is designed for attaching to the Outer side of your Stock Fender, Saddlebags, Backrest Plate or ANY Surface!

This Led Strip Functions as Running Light, Brake Light and Turn Signals ALL in one Strip!

It's Different than the "Led Turn Signal Brake Strips" we sell.

Our LED Strip Features a Red Running Light and Full Led Brake Light Across the Entire Length of the Led Strip.

Hit your Turn Signal switch and that side LEDs will blink in Amber on either end of the Led Strip!

This is a Completely Different Led Strip than others out there!

The Red Leds Run the Full Length of the Strip and the Amber Leds are side by side with the Red ones but you wouldn't know it until you hit your brake or turn signals!

Features:

- Features Red Running & Brake along with Amber Turn Signals
- Entire light bar Illuminates as Running and Brake.
- As Turn Signal or Right or Left Side Switch from Red to Amber Turns
- Facing towards the Traffic makes for  wider visibility.
- Double Side Mounting Tape on back, just peel and Apply

- Instructions included 
- Includes 1 Dual Element Circuit.

Your Led Strip choice is Smoked Led Strip with Red Brakes and Amber Turns ONLY!

NOTICE: 2012 & UP V-RODS AND MUSCLES! HD HAS CHANGED THE TURN SIGNALS IN THE BACK TO RED SO YOU'LL HAVE TO RUN THE WIRES FROM YOUR TURN SIGNALS UP TO THE FRONT TURN SIGNAL HARNESS SO THEY DON'T COME ON AS "RUNNING" LIGHTS WHEN YOU BRAKE!

To measure the Length you need take a Fabric Tape Measure and measure the outer side of your Fender for the Correct Size!

Keep in mind the led strips have to bend around the corner of your fender so the Shorter the strip it's harder to bend the corner to stay!
 

CHOOSE FROM THESE SIZES

7" Led Strips with Amber Turns & Red Brake Leds 
#
TFDC50S
$63.00 

9.3" Led Strip 
w/Amber Turns & Red Brake Leds 
#
TFDC70S
$83.00 

11.7" Led Strip
w/Amber Turns & Red Brake Leds 
#TFDC90S
$103.00 

This is a Perfect way to mount on the outside of your 2012 & up Fenders use a 11.7" for the Strip to
Wrap Around your Rear Fender without bending the led strip.

You may want to Purchase our "Rear License Plate Mount" Located HERE

And you can Remove your Plastic Lic Plate and Bulky Turn Signals and Clean up the Rear Fender.

Please Measure the area your wanting the strip to go on BEFORE You Order!

Want the Brake Light to stay on as Running Lights as well?

Then you need to add the
 "Dual Element wiring kit.
$8.00

US Shipping is around $12.00
but may be more due to the size you choose!

International Shipping is around $24.00 
we Refund Shipping Overcharges!

NOT DOT APPROVED!
Not Legal in some States, check your State Requirements!
 
Note: Do not Directly light up your Turn Signals as Running Lights if they are AMBER, it's ILLEGAL!

NOTE: The only time you need a Signal Stabilizer (below) is for these to
work Properly If you have alot of LED's already on your bike this is the
answer to the Overload!
 
Not all bikes really need them unless you notice a fast pace turn signal

or a slow paced one then you will need it.

Install instructions are HERE

50/50 Led Brake/Turn Strips

  • Product Code: 50/50 Led Brake/Turn Strips
  • Availability: Pre-Order
  • $0.00


Available Options