• Knight Rider Brake Light Bar
Knight Rider Brake Light Bar 

3 Different Styles of "Knightriderz" Now Available in 2 sizes!

The unit comes pre-taped with 3M double sided tape for easy mounting to any flat surface. 
Simply connect the black wire to any ground wire, the Red wire to your existing brake light wire and the blue wire to an existing running light power source. 
Works with any 12VDC system, no load equalizer or resistors required.

Your Choice of Red or Smoked Lens.

Works great with Our Cut Fenders for V-Rods, as you can mount it on your "Cut" inner fender,
underneath but you will have to fabricate a peice for it to mount
to so it faces outwards towards the traffic.
 
Sequential Lights going across the bar like the Knightrider TV Show Car!
This light bar contains 12 high power dual intensity LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence.
When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released.
Both modes, running and brake, have been designed to create the maximum visibility. 
 
4.75" Long .7" Tall .7" Wide
 
Running Lights to Brake Leds 

CD-LB02 "Red"
Knight Rider Brake Light
$29.95
 
Need a longer one?
 
7.5" x .7" x .7"
 
CD-LB22 "Red"
Knight Rider Brake Light
$39.95
 
CD-LB22-S "Smoked"
Knight Rider Brake Light
$39.95
 
Flash then Brake Light Bar.
This light bar contains 12 high power dual intensity LEDs. In running light mode the LEDs are on in low intensity mode.
When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released.
Both modes, running and brake, have been designed to create the maximum visibility. 
 
CD-LB03 "Red"
Knight Rider Brake Light
$29.95
 
CD-LB03S "Smoked"
Knight Rider Brake Light
$29.95
 
So you just want a Brake Light without "Flashing" or the "Sequential" or "Flashing LEDs", like the Ones Above?
This light bar is for you!  
This light bar contains 12 high power dual intensity LEDs.
In running light mode the LEDs are on in low intensity mode.
When the brake or turn signal is applied the LEDs will then go to full intensity mode.
 
CD-LB01 "Red"
Knight Rider Brake Light
$29.95
     
Need a longer one?
 
7.5" x .7" x .7"
 
CD-LB21R "Red"
Knight Rider Brake Light
$39.95
   
NOT DOT APPROVED! 

Check with your State, it may be Illegal to Run "Knight Rider" Pulsating Leds!

US Shipping
$10.00

International Priority Shipping is about
$39.00
depending on the destination.

Shipping Overcharges will be Refunded after shipping and we know what it is!

Knight Rider Brake Light Bar

  • Product Code: Knight Rider Brake Light Bar
  • Availability: In Stock
  • $0.00


Available Options