These Little "Bullet" Styled Led Lights are so Bright you won't believe them!
- absolute unique, new design and principle of operation (light control by TranzLight® Technology)
- extremely attractive appearance due to transparent glass body and very small aluminium base
- highest luminosity, achieved by state-of-the-art high output LED technology (IntensiLED®)
- electronic voltage conditioning by IC controlled constant power source with 330kHz pulses and safe protection electronics
- extremely bright light in radiation direction, highly visible light in nearly all directions
Put them anywhere you want!
Simply Connect the Black wire to any ground wire, the Red wire to your Exiting Turn Signal Module for the power source.
Works with any 12VDC system, no load equalizer or resistors required.
Works Great with our Rear Shock Turn Signal Mounts HERE. (see pic's on the right)
NOTICE: 2012 & UP V-RODS AND MUSCLES!
HD HAS CHANGED THE TURN SIGNALS IN THE BACK TO RED SO IF YOU WANT "AMBER" TURNS ON THE BACK, YOU'LL HAVE TO RUN THE WIRES FROM YOUR TURN SIGNALS UP TO THE FRONT TURN SIGNAL HARNESS SO THEY DON'T COME ON AS "RUNNING" LIGHTS WHEN YOU BRAKE!
IF YOU WANT RED TURN SIGNALS YOU CAN STILL USE THE REAR CONNECTION AS THEY WILL FUNCTION AS TURN SIGNALS AND BRAKE LIGHTS AS WELL.
NOT DOT APPROVED!
Comes in Sets of 2!
49mm Front Turn Signal Mounts
These CNC Billet Brackets allow you to put Our Turn Signals on your Front Forks.
Set of 2 Hollowed on the Inside for the Mounting Bolts and to Conceal the Wires.
Split Clamp Mounts with Hardware Provided, Clamps to your Forks Anywhere you want!
No need to Adjust your Triple Trees or Fork Legs for a Quick Install.
These will NOT work with your STOCK Turn Signals, they are bolted differently.
Check Total Motorcycle out to find out what YOUR Bikes Forks are HERE
Available in 2 Finishes
Sold in Pairs
is about $39.00
Shipping Overcharges will be Refunded after shipping.